SmarTork™ SmarTork TM spirator replaces existing elevator hoistway |
ELVI - System Elevator Inspection System Elevator Testing Without the Weights This system enables you to load test hydraulic or traction elevators without the use of weights. Key Features Safety Brake Traction Force Drive Force Hydraulic Weight Determination
|
Car Top Handrail The Wurtec 18-4XX-EX Models have been designed and tested to withstand the load conditions specified in Ontario Regulation 209/01. The top of car handrail systems are designed to comply with all the requirements of the Canadian regulation listed including supporting 1.0 kN (225 lb) horizontal load and increasing the vertical height of the toe-board to 125 mm (4.91 inches). Additionally individual elements within the guard now support a load of 0.5 kN (112 lbs) over an area of 100 mm x 100 mm located at any point. Designed to comply with latest code revisions: ASME A17.1a - 2002, 2.14.1.7 and 2.10.2: Ontario Regulation 209/01 O.Reg. 350/06 of the building code act, 1992. |
Wall Inserts Wurtec’s new insert has been designed specifically for the elevator industry. It’s low profile allows it to be mounted easily on wood walls with drywall finish, embedded in block/concrete, or surface mounted wherever required. The standard hex head of a 5/8 bolt can be inserted into the channel at the notches provided. Once in the insert, the bolt will not turn. Key Features Rated Designed for Elevator Industry No Special Hardware Required Painted Black Optional cover provided to prevent insert from filling with concrete Custom mounting brackets available PATENT PENDING |